Buy — Sell — Trade — Want

To place a free ad, please send your information by email. We will attempt to post your ad within 48 hours after receipt.

Please restrict to 120 words or less. Send ad in plain, unformatted text (no attachments) in a single paragraph, only one item or grouping per paragraph.

Your ad MUST contain, the name of the item, the price, location of the item, YOUR email address. First names are okay-- no last names or mailing addresses will be posted; for security reasons, we not recommend phone numbers. Click here for Advertising Tips.

Ads run for 60 days unless requested to be extended or items are sold; please notify site when items are sold so ad can be removed, you need to include the number and date of the ad (located right above the ad), when you email to have your ad removed. As you can see the web site is extremely busy and many ads look similar, so I do not want to remove the wrong ad.

Items for sale must be located within the ANWG region: Oregon, Washington, Idaho, Wyoming, Montana, Alaska, Alberta, British Columbia, Saskatchewan and the Yukon, or within 100 miles of the borders of these states and provinces.

Classified ads are for non-commercial use; commercial suppliers should use the Suppliers Section. Ads on our web site are FREE! If you are appreciative of this service and would like to assist ANWG in maintaining this web site, you are welcome to provide a donation. Please contact e-mail for further information.

If you are a scam artist, you are not welcome on this web site !! Anti-scamming practices are in place and you are wasting your time contacting any of our advertisers!

Here are some sites to report scammers to:
http://www.consumerfraudreporting.org/reporting.php
http://www.stop-scammers.com/
http://www.competitionbureau.gc.ca/eic/site/cb-bc.nsf/eng/03233.html
http://www.scamchecker.com/
***

For Sale: Used Weaving and Spinning Equipment

02112: February 9, 2012
Harrisville Model 40 (40 inch, 4 harness, 6 treadle) with bench and warping board (plus a few extra weaving supplies), located in Woodinville, WA. $1200. Please contact email

02012: February 6, 2012
45" counter balance loom has been lovingly refinished and comes with a bench. 4 shafts, 6 treadle unit with tencel heddles, one reed is 8 epi and a second shorter reed at 12 epi. I also have a tensioning box to go with the unit at 12 epi. For more information contact Iris at email I have pictures of the loom as well. Location Surrey, British Columbia

01912: February 6, 2012
One two harness 15 inch table loom for sale. This little Leclerc Nilus gem measures 20" inches wide, 20 inches deep,17 inches high and the reed is 15 EPI and 15" wide. Asking $40.00 for this little beauty. Email Iris for pictures and more information. Surrey, British Columbia.

01812: February 6, 2012
Having to let go of the Elizabeth spinning wheel . This wheel has many options and capabilities. This beautifully crafted wheel now has a large 61cm (24ins) wheel with 12 spokes mounted on ball bearings for smooth effortless spinning. Horizontal adjustment of the maiden bar allows perfect alignment with the 3 speed whorl. The maiden bar clamps to the base to eliminate vibration. This Double drive wheel produces a fine, firm-twist yarn particularly suited for fine wools and exotic fibres. One adjustment controls both drive band and bobbin take-up. Easily converted to single drive or bobbin lead. The treadle is pivoted for a comfortable heel-toe action. Horizontal lazy kate with 4 bobbins included. Email Iris for pictures and more information. Surrey, British Columbia.

01712: February 5, 2012
Majacraft Delta Flyer - never used, excellent condition -   $30.00.  Located in Monroe WA. Will mail but would add postage to the price.  Contact Marilyn at: email 

01612: February 1, 2012
Loomcraft 45" 8 shaft floor loom, maple, in very good condition. $600 or BO. Email. Located in Seattle.

01312: January 28, 2012
Leclerc Artisat 36" 4 shaft floor loom. Comes with both texsolv and metal heddles,  a 15 dent reed and custom made castle tray. This loom has been beautifully refinished and is in excellent condition. $495 obo, pick up only in Eugene, OR. contact Jeanne at:email

01212: January 28, 2012
45" weaving width Leclerc Counterbalance floor loom; 4 harnesses; lots of heddles and 6 treadles; comes with a 12 dent reed; lease sticks and a Leclerc Stick Shuttle.  Selling as I recently bought a larger loom. Can send a picture if you like.  Asking $375.00; located in Surrey, BC. email

01112: January 28, 2012
32 " weaving width Leclerc Initiation floor loom; 4 harnesses, lots of heddles and 4 treadles; comes with a 10 dent reed; lease sticks and a Leclerc Stick shuttle.  This loom folds down for easy storage or transport and the frame can also be adjusted and used for a quilting or rug hooking frame. Can send a picture if you like.  Selling as I bought a 8 harness loom of a similar size.  Asking $275; located in Surrey, BC. email

00912: January 21, 2012
Charley Murphy Loom.  Beautiful oak folding floor loom 42” with 8 and 15 dent reeds 4 harness. Built in Seattle. Includes some warp material.  Photos available.  Asking $400.  Located in Astoria, Oregon. Must pick up. Relocating away from the area. E-mail.

00812: ncan elect. double carder w/brush attachment, very good condition. Comes with table, $850.00. Very rere Michael Wilson solid cherry 26"production spinning wheel w/8 bobbins. Gently used and in excellent condition, $850.00. Contact Jim at email. Located in N. Tacoma.

00712: January 16, 2012
Beautiful Cranbrook loom, 60 inch, 8 harness. Excellent condition. Located in Canby, OR.  $2000 OBO email

00612: January 13, 2012
36" 4-harness Nilus Leclerc loom - 2 reeds  Asking $275.00 obo. New Zealand Pippy Spinning Wheel - 5 bobbins asking $475.00 obo  Located on Vancouver Island. email

00512: January 13, 2012
8 shaft Gilmore Floor Loom  available in Molalla, Oregon. 40 inch weaving width, 12 treadles, sectional back beam, removable top storage tray with light.  Comes with Bench and folding warping reel, 10 dent reed and raddle.  In great condition!  $3500, contact Mandy at email

00412: January 10, 2012
16 Harness 60 “AVL Dobby loom - purchased refurbished #01854; metal heddles; extra dobby bars; original Compu Dobby I (not used by me); 1 yard sectional beam and 1/2 yd plain beam; cloth advance system; spongy wrapper on front beam. Many pirns, two shuttles. Double box flyshuttle with overhead beater and single box flyshuttle with floor mount beater. Tension box and track mount system for warping. Cone rack for 56 cones. All assembly/disassembly paperwork from AVL. Loom is currently set up in Chehalis, WA and can be viewed with an appointment. Disassembly assistance is included but reassembly assistance depends on location. $7000 for all. Reasonable offers will be considered. Contact Kim at email

00312: January 10, 2012
Beautiful Glimakra Regina vertical tapestry loom.  Loom located in Kenmore, WA.  Weaves maximum width 60" but can easily warp for narrower, or multiple warps.  Has counterbalanced beater for easy beating.  Can also ignore beater and pack wefts using hands, bobbins, or forks.  Has 2 harnesses and 3 pairs of treadles for easy shed changes.  Has ratchet and pawl brake system on both ends of warp and cloth beams for even and secure tensioning. Loom disassembles into flat pieces and can be transported in van/truck.  Includes 60" 10-dent reed, tapestry forks and bobbins.  $1700.    Contact Maryann at email for photos and more info.

00212: January 7, 2012
4H Leclerc 60" counter balance floor loom with sectional warp beam, 2 reeds, tension box, 4 large shuttles and other accessories. in good working condition, just no longer being used. Similar loom with accessories would cost over $3500. $1000. in Victoria. email

26511: December 26,2011
48" Cabin Creek 8-shaft countermarche loom and bench. Cabin Creek is a Swedish-style loom made in Redmond, WA, and is very similar to a Glimakra Standard. Solid maple loom and bench includes 4 reeds and plenty of texsolve heddles and ties. The loom has two beams, one of which is a sectional warping beam. Excellent condition and weaves beautifully. Located in Kirkland, WA. $2000. email

26311: December 26, 2011
Beautiful oak Brittany Anjou Tapestry Loom (19''x32") complete with stand and all accessories, plus instructions for assembly and warping procedure.
These looms are no longer manufactured and this loom is in excellent condition- ready to weave! $300 firm. Portland,OR. email

26011: December 20,2011
4H Table loom, $100. Probably home-made. One 10 dent reed 28". Photos available. Surrey, B.C. email

25911: December 20, 2011
Glimakara Countermarch Floor Loom. Ideal model, 6 harness, 6 treadle 39" weaving width, adjustable bench, set up video, three reeds, lease sticks. Asking $2200
Scappoose, Oregon email

25711: December 14, 2011
Foldable floor loom.  48 inch, 4 harness cascade loom in cherry.  Includes 36 inch bench with storage.  $750.  No shipping; cash only. Contact TOM in Salem, Or.at email.

sFiber and Fiber Animals

01512: January 31, 2012
I have 2 Fiber producing French Angora rabbits for sale at $30 each (1 buck & 1 doe). They are 9 weeks old and would make great pets and will provide lovely black angora fibers for your spinning. Pictures can be provided.   Free transportation available to certain areas (Tri-Cities, WA or along the Oregon corridor from Idaho).     I will also have White French Angora rabbits for sale later in the spring.  We are located in Jerome, Idaho. email

Miscellaneous Fiber Arts Products

Wanted to Buy or Trade:
Fiberarts-related Equipment or Services

01412: January 31, 2012
I live in the South Surrey area and I am looking to purchase an Indian Head Spinning Wheel. I have used this type many years ago and I am wanting to start up again. Please contact Kathie at email

26611: December 31, 2011
Looking for a two step whorl for a Sleeping Beauty spinning wheel, very similar to Ashford Elizabeth. It was an old kit wheel from NZ back in the late 70's. email

26411: December 26, 2011
I am looking for 4" bobbins for a double drive spinning wheel. I currently have a Leclerc spinning wheel, but think that 4" Ashford bobbins would fit as long as they are for a double drive wheel. email

25811: December 14,2011
Local Portland designer looking for freelance weavers to produce custom home wares.
If interested please contact, Pam at 503.317.8771 or email.